Dynomotion

Group: DynoMotion Message: 7117 From: az9633@ymail.com Date: 3/25/2013
Subject: Snap Amp I/O confusion
Hello
I'm looking at two pages in the manual for the SnapAmp and there are different pin outs for IO0 through IO13

Page 259 shows all IO0 to 6 on the odd pins of JP7 and IO7 through 13 on the even pins. Page 260 has them in numerical order with the pin numbers. The rest of the pin outs match on both pages.

Which is correct?

AZ
Group: DynoMotion Message: 7118 From: Tom Kerekes Date: 3/26/2013
Subject: Re: Snap Amp I/O confusion
Hi  AZ,

Strange no one has mentioned that before.  I believe the schematic is correct.  I'm on vacation (Brazil looking at the Ocean) and don't have a SnapAmp handy to check.  Please do me a favor and toggle bit1 to check.

Regards
TK


Group: DynoMotion Message: 7124 From: az9633@ymail.com Date: 3/26/2013
Subject: Re: Snap Amp I/O confusion
You're right, the connector diagram is correct and the chart is wrong.

AZ

--- In DynoMotion@yahoogroups.com, Tom Kerekes <tk@...> wrote:
>
> Hi  AZ,
>
> Strange no one has mentioned that before.  I believe the schematic is correct.  I'm on vacation (Brazil looking at the Ocean) and don't have a SnapAmp handy to check.  Please do me a favor and toggle bit1 to check.
>
> Regards
> TK
>
>
>
>
> ________________________________
> From: "az9633@..." <az@...>
> To: DynoMotion@yahoogroups.com
> Sent: Monday, March 25, 2013 9:42 PM
> Subject: [DynoMotion] Snap Amp I/O confusion
>
>
>  
> Hello
> I'm looking at two pages in the manual for the SnapAmp and there are different pin outs for IO0 through IO13
>
> Page 259 shows all IO0 to 6 on the odd pins of JP7 and IO7 through 13 on the even pins. Page 260 has them in numerical order with the pin numbers. The rest of the pin outs match on both pages.
>
> Which is correct?
>
> AZ
>
Group: DynoMotion Message: 7125 From: TK Date: 3/27/2013
Subject: Re: Snap Amp I/O confusion
Thanks

TK

On Mar 27, 2013, at 3:11 AM, "az9633@..." <az@...> wrote:

 

You're right, the connector diagram is correct and the chart is wrong.

AZ

--- In DynoMotion@yahoogroups.com, Tom Kerekes <tk@...> wrote:
>
> Hi  AZ,
>
> Strange no one has mentioned that before.  I believe the schematic is correct.  I'm on vacation (Brazil looking at the Ocean) and don't have a SnapAmp handy to check.  Please do me a favor and toggle bit1 to check.
>
> Regards
> TK
>
>
>
>
> ________________________________
> From: "az9633@..." <az@...>
> To: DynoMotion@yahoogroups.com
> Sent: Monday, March 25, 2013 9:42 PM
> Subject: [DynoMotion] Snap Amp I/O confusion
>
>
>  
> Hello
> I'm looking at two pages in the manual for the SnapAmp and there are different pin outs for IO0 through IO13
>
> Page 259 shows all IO0 to 6 on the odd pins of JP7 and IO7 through 13 on the even pins. Page 260 has them in numerical order with the pin numbers. The rest of the pin outs match on both pages.
>
> Which is correct?
>
> AZ
>